Outlaw Engineering at work
Do you own one of the following vehicles?

• 92-93 Acura Integra GSR B17A1 DOHC VTEC
• 95-00 Chrysler/Dodge Avenger/Cirrus/Sebring/Stratus 2.4L L-4
• 91-96 Ford Escort GT/Mercury Tracer LTS 1.8L BP DOHC
• 89-91 Civic SI/CRX SI 1.6L D16A6 SOHC
• 92-95 Honda Civic/DelSol 1.5L D15B SOHC
• 92-95 Honda Civic EX/SI 1.6L D16Z6 SOHC VTEC
Outlaw Engineering still at work! • 96-00 Honda Civic CX/DX/HX/LX 1.6L D16Y5/7 SOHC
• 96-00 Honda Civic EX 1.6L D16Y8 SOHC VTEC
• 93-01 Honda Prelude VTEC H22A1/A4 2.2L DOHC
• 90-93 Mazda Miata 1.6L B6P DOHC
• 94-97 Mazda Miata 1.8L BP DOHC
• 99-05 Mazda Miata 1.8L BP DOHC
• 90-94 Mitsubishi Eclipse/Eagle Talon/Laser 4G63T 2.0L DOHC Turbo
• 96-99 Mitsubishi Eclipse Spyder/Galant 4G64 2.4L
• 02-04 Subaru WRX
• 00-05 Toyota Celica GT-S

Then Outlaw Engineering needs you!

Would you like a FREE performance modification installed on your car? If you own one of the models listed above and live in the Indianapolis area you have the opportunity to take part in the development of a new ThermoBlok spacer kit specifically for your car. For your trouble, you will be rewarded with a FREE set of ThermoBlok spacers installed on your ride.

What's involved?

To develop a new ThermoBlok spacer application, we prefer to have access to a full vehicle which will allow us to investigate fit-up issues and to do a before and after dyno test to asses performance changes. This will be done in two steps.

1) The first step will involve the inspection of the engine to document measurements, clearances, and any other issues that might impact a ThermoBlok spacer installation. If there are no 'show stoppers', we can proceed straight to step 2. If there are additional items that need to be worked out, i.e. adapters, brackets, etc, your car will be reassembled and sent home while the prototype parts are designed and constructed. Once any additional parts are ready, we will proceed to step 2.

2) The second step will involve recording the initial performance of the car, followed by the installation of the prototype ThermoBlok spacers. Lastly, final tests will be performed to asses the performance changes due to the ThermoBlok spacers. When we're done, you go home with a FREE set of ThermoBlok spacers installed on your car!

Simply contact us at tech@outlawengineering.com to discuss the details and to set up a session.